Jump to content
FunTimeBliss ::
Sign in to follow this  
Pic0o

Oculus Rift VR

Recommended Posts

Pic0o    3

Jack in, it's cyber-time.  Seriously though if you are still reading, I squeezed on the Rift $399 bundle with touch that went active last week.  I want to describe the experience of moving through a virtual environment and seeing your hands map in that realm, as to in reality, but it's really something you have to try to get full appreciation of.  I'm going to overview the hours I spent in so far, using Oculus software, enabling SteamVR and also some games and titles.

2017-08-17 Edit:
I wanted to mention Oculus Tray Tool and setting Super Sampling.  I have since upgraded my GPU to a 1080 Ti and am running Super Sampling @ 1.5.  Oculus Tray Toll will also let you disable USB auto power save in one click and also give you access to Visual HUD Overlays / debugging options.  The super sampling really cleans up the image quality to try and mitigate screen door effect / seeing pixels obviously.
/edit

Primer here.  You need a computer of comparable performance to drive the display of your Rift headset.  I see a recommended spec of an Intel i5-45xx series processor / CPU and Nvidia 970 or higher for your video card / GPU.  I recently built up an i7-7700k w/ 980 GTX build and it has performed extremely well in VR, without frame rate slowdown.
Your VR headset uses 1 HDMI and 1 USB connection, with the HDMI going directly into your video card.  In my case, I already had my external display on DisplayPort.  As the 980 GTX (and most recent cards from what I have seen) have 1 HDMI and the rest of ports are DisplayPort, you want to make sure your primary monitor is not using that HDMI output on the GPU / Video Card.

Additional hardware setup will be calibrating your spacial sensors, syncing any controllers and of course installing the Oculus software.  Fair warning that Windows 8.1 seems to be the baseline and there are some games that require Windows 10.  I'm on Windows 10 and wanted to warn you in advance, especially if you are still main-lining Windows 7.  Most important of all, you need physical space to play the Rift.
There are a few sitting compatible games I have found, but the more explorational titles are going to need you to have at least a 3 x 3 foot area clear.  From the center of your area, you will need to fully extend your arms to the side without being restricted.  Movement depth is less relevant but also important.  Some titles actually need you to be able to move back significantly far (as in around 7 feel away from the sensors).  I have so far tested in a 3 x 3 area, as I would need to use the living room for the deeper dimensions.  Since I picked up the Rift and Touch combo, I have 2 physical sensors installed.  1 came with the Oculus headset and the other came with the touch sensors.

I mentioned some of the contents but what you can expect to unbox are:

  • 1x Oculus Rift headset
  • 1x Sensor bar.  It looks like a small camera.  I suspect it works off Infrared similar to the Wii and Kinect devices.
  • 1x Xbox One gamepad, USB dongle and extension cable.
  • 1x Oculus remote.
  • 2x AA batteries for the Xbox gamepad.

 

  • 2x Oculus Touch controllers.
  • 2x AA batteries. 1 for each Touch controller.
  • 1x Oculus sensor



Once you clean up a space for you to move in VR without falling IRL, your first step after trying the tutorials (FYI: you can repeat these @ any time by clicking them in the desktop Oculus application, under your Library tab.), will be to get used to recalibrating center.  This will be most appropriate when changing from standing or sitting play.  In Steam you will get to the system menu by Right controller Menu button.  There you will see a re-center calibration.  If you are sitting, set your height to approx where your head is from the ground.  I find 42 inches (3 ft 6 inches) works well for sitting.  Some of this will need you to interact with Windows desktop for the height adjustment.
If you load SteamVR and are below the ground, you need to change your height settings.
Similarly in Oculus VR, the Right controller Menu button gives you a similar option to re-calibrate center.  For height adjustment in Oculus, you'll want to go to Settings | Devices | Configure Rift to change your height.  You should be able to pick the re-center option without taking your VR goggles off, as with Steam as well.

Next post will cover some applications run in VR.

Edited by Pic0o
Oculus Tray Tool and link

Share this post


Link to post
Share on other sites
Pic0o    3

Most of these are on both the Steam Store and Oculus Store.  I started in the Oculus store, until I was able to get SteamVR ruining.  To get SteamVR to work you need to click the Gear icon for Settings on the desktop program, then click General.  On this screen, enable the button for Unknown Sources.  Once you do this, SteamVR will be able to interact with the Oculus gear, as before setting this option, Steam will say it cannot find your headset and accessories.

You will need to load SteamVR from your desktop, until or unless you enable the following mod to create a steam icon.  In that guide, you are downloading a VR film, replacing the executable with a batch modified exe that loads SteamVR and also replacing some image files to show the tile in VR.  Hack fun hacking up some custom icons with the info from that guide.  It's fairly easy to follow and you will then be able to launch SteamVR from within the Oculus VR environment.

I'm starting a little backwards describing my exploration but one of my main objectives was to interact with my desktop OS in VR.  Steam handles this by selecting Desktop when you press the left menu button on a Touch pad.  This will get you back to your actual (likely Windows) OS.  I was browsing the twitter and reading email in VR.  It's a wild way to have a huge super desktop, while also letting you interact with VR games that launch from Desktop.  Steam has a few of these but I have not encountered any in Oculus VR yet.
Kickass.  Speaking of interacting with my desktop, I also wanted to try to see if I can open and manage files in a 3D realm.  I can indeed open images, movies and music by using AVOlight.Space (Multi-Screen Media Player).  The free download lets you load one screen and puts a watermark on each additional screen you load.  This can be removed by buying the $9.99 DLC content to unlock the program.  Seeing how it worked made it a no-question for me.  This app has slideshow support, music and video controls, image rounding options along with depth perception to toggle zoom and placement of your displays.  If you want to view some files in multiple windows, this is the jam.

Google Earth VR is a free download that allows you to browse Google Maps in 3D.  If you ever switched visual modes and saw the tracking of depth for images, you will certainly see how the landscape is mapped as a rendered world with relative height and depth.  This is pretty impressive to zoom and fly around in, granted I was moderate in controlling well the little I played in it.  There are also area tours you can load up and enjoy, in the event you do not have any good ideas on where to search and visit.  I wonder how restricted areas map.  I'll let you know on that one, since they are normally blurred out.  Hopefully it doesn't clip us out of the map.  In this case, I was using the touch controllers as my primary input.  Sitting compatible.

Lucky's Tale. Included platformer game with some good level design.  Graphics are cutesy like a Spiro-like game.  You have height obstacles world maps that surround you.  I was playing with the Touch controllers but this one appears to be designed for the gamepad / Xbox controller.

Oculus First Contact. This is likely the demo you play upon configuring your Rift.  A very immersive interactive demo.  I was mind blown in there and immediately suggested someone else try it too.  Great demonstration and interactive guide on using Rift and Oculus.  This is also listed in Tutorials as Touch Tutorial Complete.

Oculus Dream Deck. A video demo of a few oculus applications.  Be sure to spin around and enjoy the world map, as the case with anything else you play.

Makebox. A slick pixel editor.  I watched a video of someone giving a tutorial and was sold.  I have to try and make some dank pixel art as well.

Darkness Rollercoaster. Sitting rollercoaster ride.  Cool immersion and depth objects used.  

Rick and Morty: Virtual Rick-ality.  Very cool game that is a little difficult but rewarding.  The VR design and implementation is quite good. You may find yourself restricted in a 3x3 foot space but can re-calibrate center to accommodate this.  Crude humor and interesting use of environments.  I have been playing this for a few hours and it is a standing title, as you are doing quite a bit of exploring and reaching down.  I bought it on Steam, largely to test streaming functionality.  I can say the streaming rooms do work in SteamVR.  I finished this tonight in about 5 hours of playtime.
Be warned this game is designed for a Roomscale setup.  That being a deeper area to walk around in.

Oculus Medium. Very robust  image editing and world tool.  You can save and export materials.  Fun object creation and manipulation or a clay-like substance.

Mission ISS. This is a VR space simulator.  You can pivot around the spaceship and enjoy the view.

Blocks by Google. Another image editor in a 3D space.  Easel is your right hand where your drawing tool is the left one.  

Preta: Vendetta Vising. This is a dungeon crawler game with multiplayer either coming or available after you complete the chapter 1 missions.  I have an hour or two into this game.  There are 3 character classes to pick from at start and some tutorials that keep you in a level environment.  I was reserved on the quality of until I got to see some of the actual dungeons.  The level design layering and depth is pretty impressive.  Town is pretty close to most MMO-like RPGs.  Quest NPC in Town, Skill up trainer, shops, etc.  You get a bonus for early pre-release stuff but there is also a RMT item system.  That's a flag for performance down the line on growth. In other words, it may get very grindy of a game to encourage buying into currency boosts.

Sketchbox. VR prototyping platform.  Really cool for prototyping a 3D environment.  I'm going to try and import some 3D videos and do a mock-up environment.  Especially if you want to make a VR application, mock it up in here on the swift.

EVE: Valkyrie .  This is a flying space game.  The controls seemed tight but it was fun for a space shooter. 

Sports Bar VR. Standing game that I played last night.  Darts, Air Hockey and Pool are available.  I only played single player but it does feature online and lobbies.

The Climb. Standing game that I played about 2 minutes of due to sitting at the time of night when I tried it.

I will add more info about the last 2 games when I play them in a standing mode.  This is what I got to explore so far.  Some content is free and steam also appears to have some demos on there,  I purchased the following or got them in a sale promo:

  • Rick and Morty: Virtual Rick-ality: $30
  • AVOlight.Space. Free single display.  Unlock multiple for $10
  • EVE: Valkyrie. Free with Summer of Rift Promo.  Typically $40
  • Makebox. $10
  • Preta: Vendetta Rising. $35
  • Darkness Rollercoaster. $2
  • Oculus Adventure Pack: Includes for $70
    The Climb
    Raw Data
    SportsBar VR
    I Expect You To Die
  • Lucky's Tale. Included with your Rift purchase.

     

I also decided to pickup a 3rd sensor for better tracking when playing roomscale games. This is especially relevant when turning around and away from your desktop / front sensors. Adding the 3rd sensor will wrap you completely in motion tracking. I saw this when playing Rick and Morty and mitigated it using the recalibrate center steam menu option (that also is in the Rift menu).

Share this post


Link to post
Share on other sites
Pic0o    3

I forgot to mention I got the $399 bundle by going to a Best Buy store and getting the Rift and Touch packages.  When rung up at the register, it will be at the Promo rate and you'll get the Oculus store coupon for your free copy of EVE: Valkyrie on the receipt.  I have heard and seen that Amazon is pending more inventory, so head to a store and grab a kit if you don't want to wait.  Make sure they actually have 'em in stock, as I got the next-to-last headset last Saturday at a local store.

I did not see anywhere with the stand-alone sensors in stock so I ordered one from Amazon.  They are also out of stock with no indicated restock date.  I'm looking forward to setting up roomscale with 3 sensors to cover me when I turn around.

I have about 20 hours in VR so far and I am really enjoying it.  I have been scouring the app stores for interesting free apps to check out too.  Plenty of movies and some games to be found.  Largely you have Oculus store, SteamVR store.  Also a good resource is the Oculus Reddit page.
If you turn on Spectator mode in Rick and Morty but forget how to disable it, you need to do it from the in-game menu.  Open the entertainment center right cabinet and toggle the switch. :)

These are items included with your equipment purchase.  EVE being an add-in for the Summer promo.

  • Lucky's Tale
  • Medium
  • Toybox
  • Quill
  • Dead and Buried
  • Dragon Front
  • Robo Recall
  • Eve: Valkyrie
     

There are some good threads for applications and games on the Oculus forums. Medium has some real quality artwork and posts in there to explore.  Lots of artwork to enjoy in this thread.

I turned off the tracking grid shortly after getting used to how much physical gaming space I had.  Seeing the block grid was wrecking my immersion.  You can turn off the floor grid indicator as well.  You can do these in Oculus VR from the right touch controller settings menu.  I'm guessing this is what people mean by 'screen door effect'?

I should have a 3rd sensor hooked up early next week.  2 should be fine for most everything, but if you are playing a roomscale heavy game like Rick and Morty.  I'll be following this Oculus guide for configuring and placing sensors for roomscale. Edit with 3 sensors hooked up.  It will have you re-run the configuration wizard and welcome tutorial when the 3rd sensor is plugged in.  You really want all 3 of these sensors at the same level height. Otherwise your FOV will be highly skewed to the highest sensor.
Recalibrate your height to confirm your standing height (or change it to your head from ground while sitting (42 inches / 3 foot 6 inches in my case)).  The avatar editor has a background with a ruler, if you take a selfie from the customize screen.
To change your standing or sitting height, in the Oculus desktop software, click the Gear | Settings.  Along the left you will see Devices | Configure Rift | Floor Position.  If you are playing a sitting or gamepad game, this may be helpful it adjust your field of vision.

Share this post


Link to post
Share on other sites
Pic0o    3

Respect to the Overclockers.com.au community for tipping me off to running Oculus Tray Tool.  ASW mode will help with performance and you can also disable power-saving for the usb ports to keep your tracking active while playing.  There are some Virtual HUD overlays that are helpful for debugging and performance monitoring.

Also of note from the forums is that switching to the Beta version of Oculus Home, it will detect your SteamVR titles on launch and add them into the Oculus app.  So you don't have to side-hack an icon for SteamVR using this method.  Once you load the Steam title, it will pop into your Oculus applications menu.

Your headset has a microphone and it is on by default.  If you wish to disable this as I did, jump into your Control Panel | Sound.  In your list of Recording devices, right-click on the Rift Audio microphone and select Disable.  If you want to turn it back on, be sure to check the 'Show disabled devices' option so you can see the microphone to re-enable it.

Speaking of Steam, The Lab is a 15GB or so VR platform you can give a try to.  I played around with it briefly in the lab and some of the other mini-games.  Pause to note your standing height absolutely matters for this, so if you have your Room Config in steam set to a sitting height, you need to change that to your standing height.  This varies from game to game, but is especially dominant on steam from when going from a standing to sitting game.  Oculus seems to better accommodate sitting or standing, without needing to re-adjust your height, but by using the 'reset app position' from the main oculus home menu.

Stand-out applications have to be Google Earth VR.  It's really wild to see the area topography and be able to fly around in spectator-like mode around the world.
Dactyl Nightmare has been re-made into Polygon Nightmare.  This is a re-creation that is pretty wild and fun as a single-player bot deathmatch.  You may get ill from the movement, but I played for about 40 frags, enjoying the strafing with my upper body to move around the map.  Both Google Earth VR and Dactyl Nightmare are free apps.
I have put some hours into Chronos as well.  It's a good exploration / puzzle game that keeps me drawn in.  The leveling mechanic is interesting and has me getting a little angry when I die for sloppy reasons.  The level exploration is really rewarding in 3D.  Worth the $40 if you ask me.

In respect to demo'ing VR, people really need to wear the headset.  If you watch the on LCD output, it will be super bland without the depth.  I had my GF try a few things and so far the immersion hit hard with Google Earth VR.  She was off exploring the world, juggling views and continents.

I have also dabbled in Rock Band VR as a local store had one of the Xbox One guitars in the back.  Apparently those things are going for $90 on Amazon, despite being $40 new if you can find one in stock.  I did chuckle at having to flash the guitar firmware for it to work with RB VR.  It did indeed work and when playing, I was reminded that I am not a rhythmic person.  I only got an hour or two into that game so far.  Considering the price of game ($50) and the Guitar ($40 with Xbox One Rivals Rock Band pack), this is a more costly game to get into.  I have to say the use of the touch and the add-on mount that came with your controllers, is pretty cool with showing the Guitar on your person in VR and the crowd around you.

Darknet is a puzzle game about hacking computer networks.  It uses a cluster honeycomb design where you pick insertion points for various vulnerabilities to spread to nodes, allowing you to seize the network and obtain root.  Really cool graphical design and addictive gameplay.  A good score for the $10 asking price.

Share this post


Link to post
Share on other sites
Pic0o    3

I should add that playing Rick and Morty with my height set to actual, leaves me unable to pick stuff up off the floor.  I suggest removing 4 to 6 inches from your height, as the headset doesn't sit at the top of your head, but at eye level.  I did a replay last night and ran into this issue.

In SteamVR, you will need to re-run room setup and do the sensor calibration.  You will have a few desktop clicks to interact with.
In OculusVR you can change your floor height from the Settings | Devices section.  You will also need to put the headset on to confirm the change.

I was talking to a friend with an HTC Vive.  An immediate difference was his sensors are not wired.  For a Rift, you will need 1x USB per Sensor and 1 for the HMD (Head-Mounted-Display).  The HMD also plugs in by HDMI, but I believe I mentioned the use of DisplayPort for my primary LCD, so I had the HDMI available.  Also add a USB port if you are using the Xbox One controller dongle.
With my 3 sensor setup, my PC is using 5x USB slots for the Rift and Xbox One dongle.  Add my keyboard and mouse and all the rear USB ports are in use.  Heads up on that if your setup does not have a pool of open USB ports.

In addition, you can search for VR releases, price and their release dates via ggfilter.com.

Share this post


Link to post
Share on other sites
JeT    0

What up peeps.

To reply to your: "I'm guessing this is what people mean by 'screen door effect'?"

This is actually the lower resolution being viewed so closely to your eyes. The actual small black gap between the pixels themselves. It was one of the bigger reasons I ended up returning my bundle (more on that below). When they start rocking higher pixel densities and 1440p or eventually 4k, etc. this screen door effect will be greatly reduced.

So - I ended up getting the bundle around same time as pic0o. At first I ordered from oculus store itself, but then came to find out there was a giant back order due to their summer sale. They shoulda prepped better for that, because I and many others just went ahead and canceled the direct order from them, and then purchased for same price from Best Buy.

I was definitely impressed with the general feeling of VR. It's true when pic0o and others say you can't really explain it without experiencing it. Seeing flat screen demos / youtube videos, etc. will never do it any justice.

 

But at the end of the day, I was still bugged by the hardware limitations itself. It's like when you could see the pixels from the first iPhones and eventually they got to that crystal clear version where fonts were just totally crystal clear, vs seeing the aliasing and the screen door effect and the lower res, etc. So I will be waiting for the 2nd or 3rd generation before dipping back into VR land.

I also think the games themselves have a long way to go for hardcore gamers: wanting to sink tons of time into em while really loving the game(s) over the VR tech itself. I bought all the bundle packs in the Oculus store - spent lots o' loot to get a taste of everything, and it just wasn't blowing me outta the water. Luckily, after explaining to Oculus support staff that I returned my hardware, they gave me a one-time return (they pointed out this was an exception and have no return policy). It was a good thing I had a single order with all 3 game bundles - nearing $200. So that worked out nicely.

 

In closing -- I played with the system a LOT for a solid 10 days, then returned the rift hardware and software for basically a full refund on both sides. I'm happy I was able to get the full test drive and also jump out without sinking permanent coin. I'm still quite interested in the VR movement itself and it's future development, but I'll be sitting back for another generation or two. I think they mentioned wanting life-cycles to be between a phone and a gaming console, so we'll see how big each leap forward is.

Lates!

Share this post


Link to post
Share on other sites
Pic0o    3

Thanks for the feedback on your time with it.  I wear glasses of 1.25 or so prescription so that may play a factor in my not being as bothered by the pixelation.  I don't wear my glasses in VR.  Glad to hear you were able to work a refund out too.

I saw some people are bumping up the image quality using super sampling (via Oculus Tray Tool), similar to playing FFXI with better looking textures.  A few of the VR games I played have some native graphic options, namely Chronos.  Bumping up that IQ makes a huge difference, as the default in that is definitely a pixel show when you get close to your character.

I forgot to mention you are right about the length of games for VR.  Many of them seem to be a few hours.  Hopefully the surge of headsets gets more content out there.  I think a big part of the challenge will be quality to performance cost, as top-end video cards and most other PC components to go with the headset, will make the barrier of entry even higher.

2017-08-04 edit:
I installed these sensor wall mounts in my play area and the floor and 360 coverage is MUCH better than when I had them on the included posts at desk height.  The linked 3D print, I had to file the diameter wider for the IR camera to fit in, but other than that it works great.  I used the double-sided tape mounts from 3M, as to not wreck the drywall in my apartment.
Sensors are mounted roughly 6.5 ft from the floor, aiming downward.  This helped full 360 rotation and ground coverage quite well.  My crude diagram of camera placement is:
_______________________
|         <- 02            <- 01  |
|                                        |
|                                        |
|                                        |
|<- Sensor 03                  |
_______________________

Sensor 01 is along the wall where my desk is in the corner.
Sensor 02 is about 5 feet away from the corner sensor.
Sensor 03 is about 10 feet from the back wall where 01 and 02 are installed and about 6 feet from sensor 2 to the corner of the adjoining wall.
I have the front 2 sensors lightly at inward angles to the area I stand, with sensor 3 pointing, basically back to my monitor between sensor 01 and 02.  This also passed my Rick and Morty floor grab test, vastly better than the prior desk height mounts.

Edited by Pic0o
Wall mounts

Share this post


Link to post
Share on other sites
JeT    0

Yeah I agree, they could prob push out another gen right now but the entry being already so high I do also tend to believe everyone is waiting for hardware to catch up a bit. Before rift put that $400 bundle sale on, they'd been seeing much lower sales #'s than they had been hoping for. Hopefully this summer sale ultimately pushes out the inventory they were hoping for originally and plays catch up.

 

I did toy around with the dev tool that offers the super sampling, but I still would see the grid in-between from just the hardware itself. It did have some nice results in certain types of games though, where SSing the textures played to that art style. Certain games with simplier shading or basic textures with mostly just color shades didn't show much different to me. It was hit and miss.

 

But that mixed with the games was ultimately the reason I put it back in the pond. I also ended up picking up a switch and I've been obsessed with BoTW and am happy to be playing some first party nintendo games with more coming in holiday season. I haven't had nintendo stuff since n64, so I'm LOOOOONGGGG overdue. But that's OT and for another thread. :)

Share this post


Link to post
Share on other sites
Sign in to follow this  

×