Pic0o Posted September 17, 2022 Report Share Posted September 17, 2022 (edited) Got a 12th Gen Intel to go with my prior / other setup with a Gundam board and 11th Gen Intel. Specs for the 12th Gen Intel build ( as of 2023-09-26 ) : Quote System: Micro-Star MS-7D30 CPU: Intel i9-12700KS Motherboard: MSI MPG Z690 FORCE WIFI (MS-7D30) (all builds) Memory: 109 GB free of 128 GB @ 4 GHz GPU: Nvidia 4090 RTX ( 24 GB ) Display: 5120 x 1440 - 32 Bit colors OS: Windows 11 Honestly so far, the 12th Gen has been a bit fucky to have good temperatures using Corsair H150i Elete LCD and H115i (dual 140 mm fans and radiator). I have a 3090 that runs well but hot damn, long graphics card. By that I mean, most depth used in a case and I had to move radiator upward for depth for cases. Angry 12th Gen Intel. Edit! 2023-08-04: Keep in mind I only recently resolved the reboots. Power supply was too weak! I had a 750 W PSU trying to run the 12th Gen and a 3090 RTX. This works for an 11th Gen since that CPU pulls around 250 Watts give or take. 3090 will grab 350 W and a 12th Gen can pull about 350 W as well. Fun fact as the 212 F was not causing reboots but is more due to poor contact with the default CPU Clip. As I mention later in this thread, I added a 12th and 13th Gen CPU socket block to assist in an even mount. Be cautious of over-clamping to not spread thermal compound out from between cooler and GPU, even with CPU support block installed. Original post continues below: Corsair Crystal Series 680X is my primary case for the 12th Gen. I still have some airflow tweaks but main goals are re-gooping thermal paste. For a nice thermal cap test, run https://www.userbenchmark.com/ benchmark. I also learned Cyberpunk 2077 also has a benchmark now. It's in the settings in-game. Typing this wave of post on the 11th Gen before I redo thermal compound again. I saw the GPU price drops and things, went a little ham and got a 3090 RTX for $1350 instead of the $2000+ it debuted at in May of 2022. https://rog.asus.com/graphics-cards/graphics-cards/rog-strix/rog-strix-rtx3090-o24g-eva-model/ Specs: https://rog.asus.com/graphics-cards/graphics-cards/rog-strix/rog-strix-rtx3090-o24g-eva-model/spec/ The liquid smooth FFXIV Benchmarks are maddening. Baby watches them with me as well. Speaking on this GPU, check these dimensions. 318.5 x 140.1 x 57.78 mm 12.53 x 5.51 x 2.27 inches Haha yeah, 330 mm is the max for the Corsair 680X case. 4000x says 360 mm GPU but I would think front radiators would be tight. I moved mine to the top in the 680X case. Off to operation. Here are some UserBenchmark results from the 11th Gen Intel with a 3050 RTX in here. Quote UserBenchmarks: Game 85%, Desk 111%, Work 86% CPU: Intel Core i9-11900K - 106% GPU: Nvidia RTX 3050 - 74.7% SSD: Samsung 980 Pro NVMe PCIe M.2 1TB - 453.7% SSD: Samsung Portable SSD T5 500GB - 89.6% RAM: Corsair CMH32GX4M2D3600C18 4x16GB - 109.3% MBD: Asus Z590 WIFI GUNDAM EDITION Peak Core i9 11900K Temperatures for package and Cores max was 155 F. / 68 C. Collecting these from HWMonitor. CPU Powers Package Max 195 W Powers IA Cores Max 181 W Editing in to share below benchmarks with 3090 in the 11th Gen Intel setup. https://www.userbenchmark.com/UserRun/55377598 Current run 9/19: Quote UserBenchmarks: Game 252%, Desk 109%, Work 255% CPU: Intel Core i9-11900K - 106.4% GPU: Nvidia RTX 3090 - 243.6% SSD: Samsung 980 Pro NVMe PCIe M.2 1TB - 450.3% RAM: Corsair CMH32GX4M2D3600C18 4x16GB - 108.7% MBD: Asus Z590 WIFI GUNDAM EDITION Edited September 26, 2023 by Pic0o Stable with a new PSU. Also added 12th Gen PC Specs Link to comment
Pic0o Posted September 19, 2022 Author Report Share Posted September 19, 2022 (edited) So yeah. Make sure you have amd use the LGA 1700 mounts for 12th Gen. Turns out this cooler, I had the LGA 1155 / 11TH Gen mounts on the backplate! Specs for the 12th Gen Intel build ( as of 2023-09-26 ) : Quote System: Micro-Star MS-7D30 CPU: Intel i9-12700KS Motherboard: MSI MPG Z690 FORCE WIFI (MS-7D30) (all builds) Memory: 109 GB free of 128 GB @ 4 GHz GPU: Nvidia 4090 RTX ( 24 GB ) Display: 5120 x 1440 - 32 Bit colors OS: Windows 11 That explains the shitty full load temperatures. I also reworked fans. 3x 120mm inlet fans in front with GPU fitting too. I had to install the dual-fan 120mm radiator on top with fans pulling heat out the top and rear of case. Once radiator and fans are installed on removable top plate, I installed the front fans and plate with the graphics card removed. Veritical sliding the front fans up in front of the top radiator in my main 680X case. Then GPU fits with some mm gap and cable space. Resolving the prior front fans being outward mounted. Having little gap for air clearance before fixed. Ordered the Corsair 1700 Retrofit kit for proper risers. Edited September 26, 2023 by Pic0o Breakdown for 12th Gen Intel build Link to comment
Pic0o Posted September 19, 2022 Author Report Share Posted September 19, 2022 Pictures for the homies. Pending LGA 1700 mounts. Tweaking Harabel's GPU to a 3050 GTX from 980 GTX and a prior 1060 GTX in another server. Link to comment
Pic0o Posted September 19, 2022 Author Report Share Posted September 19, 2022 Enjoy the messy mid-build photos. Also some benchmarks with the 3090 in the 11th Gen Intel. https://www.userbenchmark.com/UserRun/55377598 Current run 9/19: Quote UserBenchmarks: Game 252%, Desk 109%, Work 255% CPU: Intel Core i9-11900K - 106.4% GPU: Nvidia RTX 3090 - 243.6% SSD: Samsung 980 Pro NVMe PCIe M.2 1TB - 450.3% RAM: Corsair CMH32GX4M2D3600C18 4x16GB - 108.7% MBD: Asus Z590 WIFI GUNDAM EDITION FFXIV Benchmark for Endwalker are about in the 18200 range for 4k resolution as the 12th Gen Intel is doing just 19800 or so while also not being properly thermaled to prevent spike at 92 % full load sustained. 1700 LGA mounts sorted will clear this foolery up. As such I am on the 11th Gen Intel now and wanted to versus the 3090 from 11th Gen and DDR4 to 12th Gen and DDR5. FFXIV Benchmark for Endwalker: Quote FINAL FANTASY XIV: Endwalker Benchmark Tested on: 9/19/2022 12:04:03 Score: 18213 Average Frame Rate: 123.4585 Minimum Frame Rate: 71 Performance: Extremely High -Easily capable of running the game on the highest settings. Loading Times by Scene Scene #1 1.388 sec Scene #2 2.545 sec Scene #3 3.671 sec Scene #4 1.562 sec Scene #5 0.686 sec Total Loading Time 9.852 sec DAT:s20220919120403.dat Screen Size: 3840x2160 Screen Mode: Full Screen DirectX Version: 11 Graphics Presets: High (Desktop) General -Wet Surface Effects: Enabled -Occlusion Culling: Enabled -LOD on Distant Objects: Disabled -Real-time Reflections: Maximum -Edge Smoothing (Anti-aliasing): FXAA -Transparent Lighting Quality: High -Grass Quality: High -Parallax Occlusion: High -Tessellation: High -Glare: Standard Shadows -Self: Display -Other NPCs: Display Shadow Quality -LOD on Shadows: Enabled -Shadow Resolution: High - 2048p -Shadow Cascading: Best -Shadow Softening: Strong Texture Detail -Texture Filtering: Anisotropic -Anisotropic Filtering: x8 Movement Physics -Self: Full -Other NPCs: Full Effects -Limb Darkening: Enabled -Radial Blur: Enabled -Screen Space Ambient Occlusion: HBAO+: Standard -Glare: Normal -Water Refraction: Normal Cinematic Cutscenes -Depth of Field: Enabled System Microsoft Windows 10 Pro (ver.10.0.19044 Build 19044) 11th Gen Intel(R) Core(TM) i9-11900K @ 3.50GHz 65373.309MB NVIDIA GeForce RTX 3090(VRAM 24348 MB) Link to comment
Pic0o Posted December 14, 2022 Author Report Share Posted December 14, 2022 Path of least resistance, I'm grabbing a compatible ROG AIO Cooler. https://rog.asus.com/cooling/cpu-liquid-coolers/rog-strix-lc/rog-strix-lc-ii-240-argb-white-edition-model/ The Corsair coolers (yes, I used multiple on this board from other builds in my pad.) all perform poorly on this board due to not making a good seal. Wish me luck, should be here at the end of the month. Doing what I can since I don't feel like eating cost and replacing a $400 motherboard. Link to comment
Pic0o Posted May 27, 2023 Author Report Share Posted May 27, 2023 The issue is exactly the same with the Asus AiO. These dual post mounts are really shitty. I started a RMA with Asus but they hardly grasp the issue. I just got a new MSI z690 board as Wifey's setup has had zero issues since last August. On this Asus, the posts wiggle when installed. Hell, last night I put washers on the rear CPU clamp to prevent post wiggle. Contact is still poor cooling and the thermal compound gets pressed unevenly due to poorly clamping. I can return the MSI if it doesn't work but considering I got the DDR5 version of her board, I should finally have a CPU that doesn't instantly thermal-throttle running Cyberpunk 2077 nor have fluxuation under minor loads between 100 F and 180 F. My 11th Gen runs like a rock and I think maybe, hits 185 F on a bad day full load. Here is my Twitter thread on it since I can hardly find decent info about the issue. Link to comment
Pic0o Posted June 1, 2023 Author Report Share Posted June 1, 2023 So the MSI has similar issues actually. I also installed a CPU mounting plate to make better contact with the CPU. In the twitter thread of mine, I found plenty of others with crappy 12th and 13th Gen cooling performance. Turns out the CPU mounting clip kind of sucks on the standard cpu mount. `Thermalright Intel 12th/13th Generation LGA1700 Anti-Bending Buckle` is the block I installed so the CPU cooler can make better contact. However Cyberpunk 2077 still hits max load under benchmark pretty quickly. To be honest, I'm going to main my 11th Gen again I think. I'll still do the RMA for the Asus but probably sell that board and keep this MSI. Personally suggest avoiding 12th and 13th Gen Intel CPUs with my experience running them nearly a year. Your mileage may vary (YMMV) but this build is a pain in the ass. Here is a good but way too long at 25 minute video detailing the CPU block install and issues with the Intel cooling on these chips. https://www.youtube.com/watch?v=iYU1OskbY-Q - Gamers Nexus video Intel Thermal Problems | Thermalright 12th Gen Contact Frame. Link to comment
Pic0o Posted June 3, 2023 Author Report Share Posted June 3, 2023 I am back on my 11th Gen Intel and just installed Diablo IV since I have a stable desktop again. Link to comment
Pic0o Posted August 4, 2023 Author Report Share Posted August 4, 2023 Fixed this with a new Power Supply. If you get reboots, make sure you have enough power. I had a 750 W that worked for the 11th Gen but was reboot life on the 12th Gen. I'm on a 4090 RTX in my 12th Gen with a 1500 W now. Still also stable. 🙂 11th Gen and 3090 RTX has a 1000 W PSU now. I also made a Wordpress post on my BlissPC.com site with the below post from Sunday and a merged post from recent to start last year Original Post: https://blisspc.com/2023/08/04/gen-12-intel-i9-12900ks-vs-11th-gen-i9-11900k-hardware-with-3090-gtx-and-nvidia-3050-980-gtx/ Link to comment
Pic0o Posted September 24, 2023 Author Report Share Posted September 24, 2023 I got my thermals performing better but still see some 212 F / 100 C peak temperatures. However, zero reboots. Been stable since last cooling work on 2023-08-07 (August). Typical desktop / general use temperatures or light loads while web browsing temperatures on the 12th Gen Intel are 125 F / 51 C to 165 F / 74 C. Installing the CPU Support block gave immensely better contact with the thermal block to CPU. My thermal applications were even, instead of like a third of the block not making good contact with processor as seen when I would check the spread on the block from prior install. Get one of those for sure if you see similar poor cooling. I was seeing huge spikes to 185 F / 85 C when under Idle and lower web browsing, before I replaced the stock CPU clip. Keep in mind for my use case, this was on 2 different Intel Z690 motherboards. (Asus and MSI) If your GPU isn't large, the 12th Gen reboot power supply issues are unlikely. When I put a 3050 GTX in my 12th Gen, it stopped rebooting. That is when I learned the power supply was root cause for instability. The cooling being higher with the higher Watt CPU is consistent on Corsair and Asus AiO kits as I tested that out on both and they performed right about equally, short of the Asus AiO being easier to make better CPU contact, before I added the mounting block. Welcome to end of my mega thread triaging my main desktop. What a ride. When I got the bigger power supply in August ( 1500 W upgrade from a 750 W ), I also grabbed an Asus ROG 4090 RTX in the store because I was enamored Micro Center had it in stock. There is an Evangelion version of the 4090 RTX now but it also costs $2300 last I checked. My $2000 stung enough and I think the Red Asuka card does not look as sick as the Rei Evangelion 3090 RTX. I will keep that one for secondary rig and crunching fun. That cart is too pretty. Granted it launched for $2000 asking price in May 2022 and dropped to $1300 in July 2022 when I picked it up. Adding some current and final build photos for the 12th Gen Intel desktop too. I had plenty of time working case setups over the last year while tweaking this rig to stable. Also note, the 4090 RTX is even bigger and longer than the 3090 RTX was. My case is the Corsair 680X RGB Crystal Series case. I actually have 2 since I got this white case and use my other black 680X case for the Intel 4th Gen i5-4690K that is for my Son to play with 😛 He has a 3050 RTX in there I took out of Wifey's case since she does not game and the Intel GPU gives less hassles for audio out on Linux, as she is a Dev that does not game it up. Don't get me started on Manjaro and typical Linux to Nvidia support or just like, general audio management and lol pulseaudio. Link to comment
Recommended Posts